Irrigation, Edging and Miscellaneous Products

Irrigation Systems

Root Rain Metro waterers are probably the most cost effective tree irrigators on the market. Simple but extremely effective, the Root Rain Metro range comes in sizes to suit all tree planting applications. (Pipe diameter is 35 mm).

Designed specifically for locations requiring a permanent irrigation/aeration solution, the Root Rain Precinct features a heavy cast aluminium inlet with a lift and swivel vented cap. Ideal for setting in paved surrounds, tree grills etc. the Root Rain Precinct incorporates an aluminium tee section and 60 mm distributor circuit for fast watering. Specification: 100 mm diameter cast inlet, circuit 60mm diameter.

The Root Rain Civic, is a well proven large capacity watering system popular with contractors and architects who like its ease of installation and the ability to cope with fast watering. Using the same tee section as the Root Rain Precinct, the Root Rain Civic features aluminium, powder coated inlet with vented cap on a retainer chain. Specification: 80mm aluminium inlet, circuit 60mm diameter.

A large capacity irrigation system with a fixed non removable grid type inlet to allow water and air through but preventing ingress of litter and debris. The Root Rain Urban has been designed as a general purpose, large capacity watering system, particularly suited to parklands and roadside verge tree planting. The inlets are strimmer resistant and can be set below mowing machine height.

The Root Rain Urban comprises a plastic tee section, perforated riser and push fit reducer inlet. The irrigation circuit is 60mm PE pipe in a choice of lengths to suit tree pit size. The inlet is moulded from polyethylene and forms a fixed, inset grid designed for ease of watering. When installed this is the only visible part on the surface. This system is easy to install and very cost effective for larger scale planting schemes.

Edging Solutions

Rite-Edge - A Long Term, Corrosion Resistant Solution to Edging. Easy installation and Saves Hours. Designed by landscape architects and contractors who have experience of the exact requirements of edging products.

• Ideal for plant bed, lawns, pathways, jogging trails, driveways, maintenance strips and many more!
• Circles are easily formed.
• Special corner connectors allow neat tight angle corners.
• Stakes lock into position for strong permanent positioning.
• Unique telescopic design is simple, quick, strong and eliminates the need for connector pins and stakes which can open in time.
• Lifetime Maintenance Free.
• Manufactured in aluminium, which is strong, light and durable. Will not crack, rot or need re-painting.
• Structurally strong aluminium stakes to prevent frost heave, which will also not rust or cause corrosion in the edging.
• Sizes available: 3.2mm x 102mm x 2.44m x 14 pieces
• Colours available: Natural Aluminium, Bronze, Green or Black.

Miscellaneous Fencing and Netting Products

12 g gauge galvanised metal in a range of heights and diameters.

For use with two stake and flat block fixing systems

Panels are 6 ft wide and come in 3 ft, 4 ft, 5 ft and 6 ft high natural woven willow

Available in a wide range of roll sizes

Double handed post driver suitable for tree stake and fence post erection

Galvanised nails in a range of sizes for fixing cross bars and stakes

Ideal for attaching plastic mesh guards to posts and stakes

Nylon cable ties for joining plastic mesh into tubes or to support mesh tubes